View BRC1608T2R2M_7312691.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

3 notice for taiyo yuden products y please read this notice before using the taiyo yuden products. ? pt ???] ?; w m tx ? pt
a ? t b?s ? ? ? ? cs ? ?xi^m { ? please read the "notice for taiyo yuden products" before using this catalog. 1 information on the general catalog reminders product information in this catalog is as of october 2008 . all of the contents specified herein are subject to change without notice due to technical improvements, etc. therefore, please check for the latest information carefully before practical application or usage of the products. please note that taiyo yuden co., ltd. shall not be responsible for any defects in products or equipment incorporating such products, which are caused under the conditions other than those speci?ed in this catalog or individual speci?cation. please contact taiyo yuden co., ltd. for further details of product specifications as the individual speci?cation is available. please conduct validation and veri?cation of products in actual condition of mounting and operating environment before commercial shipment of the equipment. all electronic components or functional modules listed in this catalog are developed, designed and intended for use in general electronics equipment.(for av, of?ce automation, household, of?ce supply, information service, telecommunications, (such as mobile phone or pc) etc.). before incorporating the components or devices into any equipment in the ?eld such as transportation,( automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have direct in?uence to harm or injure a human body, please contact taiyo yuden co., ltd. for more detail in advance. do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, submarine system, military, etc. where higher safety and reliability are especially required. in addition, even electronic components or functional modules that are used for the general electronic equipment, if the equipment or the electric circuit require high safety or reliability function or performances, a suf?cient reliability evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to install a protective circuit is strongly recommended at customer's design stage. the contents of this catalog are applicable to the products which are purchased from our sales of?ces or distributors (so called ? taiyo yuden ? s of?cial sales channel ? ). it is only applicable to the products purchased from any of taiyo yuden ? s of?cial sales channel. please note that taiyo yuden co., ltd. shall have no responsibility for any controversies or disputes that may occur in connection with a third party's intellectual property rights and other related rights arising from your usage of products in this catalog. taiyo yuden co., ltd. grants no license for such rights. caution for export certain items in this catalog may require specific procedures for export according to ? foreign exchange and foreign trade control law ? of japan, ? u.s. export administration regulations ? , and other applicable regulations. should you have any question or inquiry on this matter, please contact our sales staff. should you have any question or inquiry on this matter, please contact our sales staff.
;my applications goyordering code ??y features 360 ? pt ???] ?; w m tx ? pt
a ? t b?s ? ? ? ? cs ? ?xi^m { ? please read the "notice for taiyo yuden products" before using this catalog. operating temp. ? 25 ? 105 ?
a ?~ c? ? including self-generated heat ?
go w l : mm inch 1608 0603 1 . 6 0 . 8 mm 2012 0805 2 . 0 1 . 2 mm 2016 0806 2 . 0 1 . 6 mm 2518 1007 2 . 5 1 . 8 mm 3225 1210 3 . 2 2 . 5 mm ?
go w l : mm inch 1608 0603 1 . 6 0 . 8 mm 2012 0805 2 . 0 1 . 2 mm 2016 0806 2 . 0 1 . 6 mm 2518 1007 2 . 5 1 . 8 mm 3225 1210 3 . 2 2 . 5 mm 7 6 1 3 4 5 2 b r 2 5 1 8 t r 2 m 2 ~ brc 2016/brl 3225 y
a ? ????>;t??z7g?p
?-??q`?`h{ dc/dc???srwg?v? ?aqb?z s?
?-t&`h ? ~ ? ???????pb{ ~ brc 2016/brl 3225 new products the best ef?ciency design is achieved by adopting bottom-surface elec- tr ode structur e.small and low-pro?le wound chip inductors that are suit for module design which needs high electric current like dc/dc convert- ers. (" ????? ????? smd inductors compact type ~ 3?zhddzdvczdsczpdaz ???sw ?dc/dc ???;m 1 br smd ????? 4 t a?e?? a
6 ???????0) m ?20? k ?10? for small dc/dc converter cellular phone, hdd,dvc, dsc, pda, lcd display etc . 5 a j ? ptg j? 7 1?? 1 br smd inductors type 3 6 2 5 standard product internal code 7 1blank space 2 3 4 t tape and reel packaging ?
q?7 ? rdc l ? c g?v ? ? ?????? h ? r 20 0 . 2 1 r 0 1 . 0 2 r 2 2 . 2 4 r 7 4 . 7 characteristic spec l low p ro?le c hig h current nominal inductance h example r 20 0 . 2 1 r 0 1 . 0 2 r 2 2 . 2 4 r 7 4 . 7 inductance tolerance m ?20? k ?10?
?
goyexternal dimensions ferrite products 5 361 ? pt ???] ?; w m tx ? pt
a ? t b?s ? ? ? ? cs ? ?xi^m { ? please read the "notice for taiyo yuden products" before using this catalog. p. 362 p. 364 p. 365 p. 366 p. 14 ??aa part numbers ?
q
$ electrical characteristics a packaging ?t
q reliability data ?; w ?? pr ecautions ?3???? selection guide etc p. 374 l h w e 1.0 2.2 4.7 10 22 47 100 220 t y p e range br l2518 br l3225 br c2016 1000 1 h 0. 4 7 h 4. 7 h 10 0 h 0 .0 80 850 0.135 470 0.400 2,200 1 h 10 0 h 0. 0 43 700 0.350 250 2.50 850 0.135 1,050 0.090 85 0.850 270 7.70 1 h 100 h 1, 1 00 0.085 170 0.400 520 3.40 2.2 h 0.2 h 9 80 0.060 0.180 520 0.550 280 imax | ma rdc ? 30 ?|
imax | ma rdc ? 30 ?|
imax | ma rdc ? 30 ?|
imax | ma rdc ? 30 ?|
imax | ma rdc ? 30 ?|
br l2012 br c1608 inductance | h ?t??3??y available inductance range a a c b
* ????y recommended land patterns ?
w?? ~ ?
y6??yw ]?;<^m?b?os&mmh`?b{ ~ ?
a ?wx?i ?zx???x?i?otv??b{ surface mounting ~ mounting and soldering conditions should be checked beforehand. ~ applicable soldering pr ocess to this pr oducts is re?ow soldering only. unit : mm inch type ! , 4 br c 16 08 1 . 6 ? 0 . 2 0 . 06 3 ? 0 . 008 0 . 8 ? 0 . 2 0 . 03 1 ? 0 . 008 0 . 8 ? 0 . 2 0 . 03 1 ? 0 . 008 0 . 45 ? 0 . 15 0 . 01 6 ? 0 . 006 br l 2012 2 . 0 ? 0 . 2 0 . 07 8 ? 0 . 008 1 . 25 ? 0 . 2 0 . 04 9 ? 0 . 008 1 . 0 max 0 . 04 0 max 0 . 5 ? 0 . 2 0 . 02 0 ? 0 . 008 br c 2016 2 . 0 ? 0 . 2 ( 0 . 078 ? 0 . 008 ) 1 . 6 ? 0 . 2 ( 0 . 063 ? 0 . 008 ) 1 . 6 ? 0 . 2 ( 0 . 063 ? 0 . 008 ) 0 . 5 ? 0 . 2 ( 0 . 020 ? 0 . 008 ) br l 2518 2 . 5 ? 0 . 2 0 . 09 8 ? 0 . 008 1 . 8 ? 0 . 2 0 . 07 1 ? 0 . 008 1 . 2 max 0 . 04 8 max 0 . 5 ? 0 . 2 0 . 02 0 ? 0 . 008 br l 3225 3 . 2 ? 0 . 2 ( 0 . 126 ? 0 . 008 ) 2 . 5 ? 0 . 2 ( 0 . 098 ? 0 . 008 ) 1 . 7 max ( 0 . 068 max) 0 . 75 ? 0 . 2 ( 0 . 03 ? 0 . 008 ) unit : mm type a b c 160 8 0 . 55 0 . 80 1 . 00 2012 0 . 65 0 . 90 1 . 40 2016 0 . 70 0 . 80 1 . 80 2518 0 . 65 1 . 50 1 . 95 3225 1 . 00 1 . 60 2 . 70 inductance imax ma rdc ? 20 %
imax ma rdc ? 30 %
imax ma rdc ? 30 %
imax ma rdc ? 30 %
imax ma rdc ? 30 %
1 h 2 , 200 1 . 0 h 0 . 043 1 . 0 h 1 , 000 1 . 0 0 . 080 1 . 0 h 1 , 100 1 . 0 h 0 . 085 1 . 0 h 1050 0 . 47 h 0 . 090 0 . 47 h 980 0 . 20 h 0 . 060 0 . 20 h 2 . 2 h 700 10 h 0 . 350 10 850 2 . 2 h 0 . 135 2 . 2 h 520 10 h 0 . 400 10 270 10 h 0 . 850 10 h 520 1 . 0 h 0 . 180 1 . 0 h 4 . 7 h 250 100 h 2 . 50 100 h 470 4 . 7 h 0 . 400 4 . 7 h 170 100 h 3 . 40 100 h 85 100 h 7 . 70 100 h 280 2 . 2 h 0 . 550 2 . 2 h e ? examples
362 ? pt ???] ?; w m tx ? pt
a ? t b?s ? ? ? ? cs ? ?xi^m { ? please read the "notice for taiyo yuden products" before using this catalog. ??aay part numbers br c 1608 type ord ering code ehs environmental hazardous substances ? ? ??? ??? ind uctance [ h] ?? ???? ?0) ind uctance tol erance ~? *t
: sel f-resonant fre quency [mh z] min v ? dc res istance [
] ? 30 % ?v t rat ed current [ma ] *t
: mea suring fre quency [mh z] v o t?0?v sat uration current idc 1 9s ?0 temperature rise current idc 2 br c 1608 tr 20 m rohs 0 . 20 ? 20 % 400 0 . 060 1750 980 7 . 96 br c 1608 tr 35 m rohs 0 . 35 300 0 . 080 1400 810 br c 1608 tr 45 m rohs 0 . 45 200 0 . 090 1250 800 br c 1608 tr 56 m rohs 0 . 56 170 0 . 095 1150 760 br c 1608 tr 77 m rohs 0 . 77 150 0 . 110 1000 660 br c 1608 t 1 r 0 m rohs 1 . 00 140 0 . 180 850 520 br c 1608 t 1 r 5 m rohs 1 . 50 120 0 . 300 700 410 br c 1608 t 2 r 2 m rohs 2 . 20 100 0 . 550 550 280 br l 2012 type ord ering code ehs environmental hazardous substances ? ? ??? ??? ind uctance [ h] ?? ???? ?0) ind uctance tol erance ~? *t
: sel f-resonant fre quency [mh z] min v ? dc res istance [
] ? 30 % ?v t rat ed current [ma ] *t
: mea suring fre quency [mh z] v o t?0?v sat uration current idc 1 9s ?0 temperature rise current idc 2 br l 2012 tr 47 m rohs 0 . 47 ? 20 % 350 0 . 090 1 , 100 1 , 050 7 . 96 br l 2012 t 1 r 0 m rohs 1 . 0 300 0 . 135 850 850 br l 2012 t 1 r 5 m rohs 1 . 5 250 0 . 180 700 750 br l 2012 t 2 r 2 m rohs 2 . 2 200 0 . 300 600 550 br l 2012 t 3 r 3 m rohs 3 . 3 190 0 . 500 490 440 br l 2012 t 4 r 7 m rohs 4 . 7 150 0 . 550 340 400 br l 2012 t 6 r 8 m rohs 6 . 8 60 0 . 750 290 350 br l 2012 t 100 m rohs 10 30 0 . 850 270 330 2 . 52 br l 2012 t 150 m rohs 15 15 1 . 00 220 300 br l 2012 t 220 m rohs 22 13 1 . 30 190 270 br l 2012 t 330 m rohs 33 8 . 0 2 . 00 150 220 br l 2012 t 470 m rohs 47 7 . 0 3 . 50 125 160 br l 2012 t 680 m rohs 68 6 . 5 5 . 80 100 110 br l 2012 t 101 m rohs 100 6 . 0 7 . 70 85 85 0 . 796 br c 2016 type ord ering code ehs environmental hazardous substances ? ? ??? ??? ind uctance [ h] ?? ???? ?0) ind uctance tol erance ~? *t
: sel f-resonant fre quency [mh z] min v ? dc res istance [
] ? 30 % ?v t rat ed current [ma ] *t
: mea suring fre quency [mh z] v o t?0?v sat uration current idc 1 9s ?0 temperature rise current idc 2 br c 2016 t 1 r 0 m rohs 1 . 0 ? 20 % 450 0 . 085 1 , 350 1 , 100 0 . 10 br c 2016 t 1 r 5 m rohs 1 . 5 370 0 . 150 1 , 100 820 br c 2016 t 2 r 2 m rohs 2 . 2 250 0 . 180 910 760 br c 2016 t 3 r 3 m rohs 3 . 3 140 0 . 220 740 680 br c 2016 t 4 r 7 m rohs 4 . 7 78 0 . 270 660 610 br c 2016 t 6 r 8 m rohs 6 . 8 39 0 . 330 550 560 br c 2016 t 100 ? rohs 10 ? 20 % ? 10 % 35 0 . 400 450 520 br c 2016 t 150 ? rohs 15 28 0 . 600 400 410 br c 2016 t 220 ? rohs 22 24 1 . 00 310 310 br c 2016 t 330 ? rohs 33 13 1 . 70 270 240 br c 2016 t 470 ? rohs 47 11 2 . 20 210 210 br c 2016 t 680 ? rohs 68 8 2 . 80 20 0 190 br c 2016 t 101 ? rohs 100 7 3 . 40 14 0 170 ? w?tx???????0)g? m?hxk u???b{ ~ please specify the inductance tolerance code. m or k t v o t?0?v idc1 xzv o tt????????? ferrite products 5 363 ? pt ???] ?; w m tx ? pt
a ? t b?s ? ? ? ? cs ? ?xi^m { ? please read the "notice for taiyo yuden products" before using this catalog. br l 2518 type ord ering code ehs environmental hazardous substances ? ? ??? ??? ind uctance [ h] ?? ???? ?0) ind uctance tol erance ~? *t
: sel f-resonant fre quency [mh z] min v ? dc res istance [
] ? 30 % ?v t rat ed current [ma ] *t
: mea suring fre quency [mh z] v o t?0?v sat uration current idc 1 9s ?0 temperature rise current idc 2 br l 2518 t 1 r 0 m rohs 1 . 0 ? 20 % 130 0 . 080 1600 1000 7 . 96 br l 2518 t 1 r 5 m rohs 1 . 5 100 0 . 100 1200 920 br l 2518 t 2 r 2 m rohs 2 . 2 80 0 . 135 1000 850 br l 2518 t 3 r 3 m rohs 3 . 3 70 0 . 300 800 580 br l 2518 t 4 r 7 m rohs 4 . 7 60 0 . 400 700 470 br l 3225 type ord ering code ehs environmental hazardous substances ? ? ??? ??? ind uctance [ h] ?? ???? ?0) ind uctance tol erance ~? *t
: sel f-resonant fre quency [mh z] min v ? dc res istance [
] ? 20 % ?v t rat ed current [ma ] *t
: mea suring fre quency [mh z] v o t?0?v sat uration current idc 1 9s ?0 temperature rise current idc 2 br l 3225 t 1 r 0 m rohs 1 . 0 ? 20 % 220 0 . 043 2 , 400 2 , 200 0 . 10 br l 3225 t 2 r 2 m rohs 2 . 2 150 0 . 065 1 , 850 1 , 600 br l 3225 t 4 r 7 m rohs 4 . 7 120 0 . 180 1 , 300 1 , 000 br l 3225 t 100 ? rohs 10 ? 20 % ? 10 % 70 0 . 350 900 700 br l 3225 t 220 ? rohs 22 50 0 . 690 550 470 br l 3225 t 470 ? rohs 47 40 1 . 00 4 20 390 br l 3225 t 101 ? rohs 100 30 2 . 50 2 70 250 ? w?tx???????0)g? m?hxk u???b{ ~ please specify the inductance tolerance code. m or k t v o t?0?v idc1 xzv o tt????????? 364 ? pt ???] ?; w m tx ? pt
a ? t b?s ? ? ? ? cs ? ?xi^m { ? please read the "notice for taiyo yuden products" before using this catalog. inductance h inductance h impedance
inductance h inductance h inductance h dc bias ma dc bias ma dc bias ma dc bias ma dc bias ma frequency mhz impedance
impedance
impedance
impedance
frequency mhz frequency mhz frequency mhz brl3225 brl2518 brc1608 brl2012 brc2016 brl3225 brl2518 brc1608 brl2012 brc2518 1 0.1 0.1 0.1 1 10 100 1000 100000 10 100 1000 10000 1 100000 10000 1000 100 10 1 0.1 10 100 1000 10000 1 1 100000 10000 1000 100 10 10000 1000 1000 10 1 1 10 1 10 100 10 0.1 1 10 0.1 1 10 10 100 1000 10000 1 10 100 1000 1 1 0 100 1000 10000 frequency mhz 1 10 100 1000 0.1 1 10 100 1000 1 10 100 1000 1 10 100 1000 10000 1 1 0 100 1000 10000 1 1 0 100 1000 10000 1 10 100 1000 10000 101? 100? 1r0m 101? 100? 1r0m 4r7m 2r2m 1r0m 4r7m 2r2m 1r0m r77m 2r2m r20m r77m 2r2m r20m 101? 100? 1r0m 101m 101m 100m 100m 1r0m 1r0m 101? 100? 1r0m ?
q
$yelectrical characteristics v o t?
q?ydc bias characteristics measured by hp4285a ??e??? *t
:?
qy impedance-vs-frequency characteristics measured by hp4291a)
ferrite products 5 365 ? pt ???] ?; w m tx ? pt
a ? t b?s ? ? ? ? cs ? ?xi^m { ? please read the "notice for taiyo yuden products" before using this catalog. ????
go reel size ???a?sy top tape strength ??a?wxu`?xz<
$1m2to0.2?0.7nqs??b{ the top tape requires a peel-off force of 0.2 to 0.7 n in the direction of the arrow as illustrated below. 10.0 ? 1.5 (0.394 ? 0.059) 2.5?< 0.098max 180 7.09 ) 0 3 0 0.118 60 2.36 ) 1 0 0.039 0 ????? ? ~ ? leader and blank portion 160 mm ? 200 mm 6.3inches to 7.87inches ? blank portions ??
? ? chip cavity ? blank portions ???? ? leader ?v z `m2 direction of tape feed 160 ? 320mm 6.3 inches to 12.8 inches 400 mm ? 560 mm 16.0inches to 22.4inches ay packaging ?a?e??p tape material ?7 ? !?o?
: minimum quantity ?a?e??
go taping dimensions ??a? 8mm ? embossed tape 0.315 inches wide a? 8mm ? card board carrier tape 0.315 inches wide typ e a j
:? |x standard quantity | pcs a?e?? paper tape ??a?e?? embossed tape br c 1608 ? 3000 br l 2012 ? 3000 br c 2016 ? 2000 br l 2518 ? 3000 br l 3225 ? 2000 typ e ??
? ? chip cavity
? e?? insertion pitch a? ? tape thickness a b f t k br c 16 08 1 . 1 ? 0 . 5 0 . 04 ? 0 . 002 1 . 9 ? 0 . 5 0 . 076 ? 0 . 002 4 . 0 ? 0 . 1 0 . 157 ? 0 . 004 0 . 25 ? 0 . 05 0 . 01 ? 0 . 002 1 . 35 max 0 . 05 4 br l 2012 1 . 40 ? 0 . 1 0 . 056 ? 0 . 004 2 . 20 ? 0 . 1 0 . 088 ? 0 . 004 4 . 0 ? 0 . 1 0 . 157 ? 0 . 004 0 . 25 ? 0 . 05 0 . 01 ? 0 . 002 1 . 2 max 0 . 04 8 br c 2016 1.9 ? 0.2 0.075 ? 0.008 2.2 ? 0.2 0.087 ? 0.008 4.0 ? 0.1 0.157 ? 0.004 0.3 ? 0.05 0.012 ? 0.002 2.15max 0. 085max br l 2518 2 . 3 ? 0 . 2 0 . 092 ? 0 . 008 2 . 8 ? 0 . 2 0 . 112 ? 0 . 008 4 . 0 ? 0 . 1 0 . 157 ? 0 . 004 0 . 3 ? 0 . 05 0 . 012 ? 0 . 002 1 . 5 max 0 . 06 0 br l 3225 2.8 ? 0.1 0.112 ? 0.004 3.5 ? 0.1 0.140 ? 0.004 4.0 ? 0.1 0.157 ? 0.004 0.25 ? 0.05 0.01 ? 0.002 1.75 max 0. 075 unit : mm inch
ferrite products 5 367 ? pt ???] ?; w m tx ? pt
a ? t b?s ? ? ? ? cs ? ?xi^m { ? please read the "notice for taiyo yuden products" before using this catalog. brl2012, brc2016, brl2518, brl3225 inductance change within?15? brc1608 inductance change within?20? 1 .operating temperature range 2 . s t o r a g e te m p e r a t u re range 3 .rated current 4 .inductance 5.dc resistance 6 .self resonance frequency 7 .temperature characteristic 8 .resistance to flexure of substrate 9.insulation r esistance between wires 10 .insulation resistance y between wire and core 11.withstanding voltage between wires and core 1/4 reliability data y item speci?ed value 25??120? nrh24, nr30/40/60/80, nrg40 type inductance change within?20? test method and remarks 40??85? within the speci?ed tolerance within the speci?ed tolerance within the speci?ed tolerance within the speci?cation 25??105? nr10050 type no damage. 25??105? brc1608, brl2012, brc2016, brl2518, brl3225 type including self-generated heat brc1608,brl2012,brc2016,brl2518,brl3225 type, nrh24, nr30/40/60/80, nrg4026 type 0 to 40? for the product with taping. nr10050 type 0 ?40? for the product with taping. the maximum dc value having inductance decrease within speci?ed value and temperature increase within 40? by the application of dc bias. inductance decrease brc 1608,brl2012,brc2016,brl2518, brl3225 type, y nrh24, nr30/40/60/80,nrg40 type, nr10050 type 30? brc1608,brl2012,brc2016,brl2518,brl3225 type lcr meter hp 4285 a or equivalent, measuring frequency:speci?ed frequency nrh24, nr30/40/60/80, nrg4026 type lcr meter hp 4285 a or equivalent, 100 khz, 1 v nr10050 typelcr meterhp 4263a or equivalent, 100khz, 1v dc ohmmeterhioki 3227 or equivalent brc1608,brl2012,brc2016,brl2518,brl3225 type, nrh24, nr30/40/60/80 type , nr 10050 type inpedance analyzer/material analyzerhp4291a or equivalent hp 4191a, 4192a or equivalent brc1608,brl2012,brc2016,brl2518,brl3225 type, nrh24, nr30/40/60/80, nrg4026 type , nr 10050 type measurement of inductance shall be taken at temperature range within 25 ? ? 85 ? . with reference to inductance value at 20 ? ., change rate shall be calculated. change of maximum inductance deviation in step 1 to 5 temperature at step 1 20? temperature at step 2 minimum operating temperature temperature at step 3 20? standard temperature temperature at step 4 maximum oparating temperature temperature st step 5 20? brc1608,brl2012,brc2016,brl2518,brl3225 type, nrh24, nr30/40/60/80, nrg4026 type the test samples shall be soldered to the test board by the re?ow . as illustrated below, apply force in the direction of the arrow indicating until de?ection of the test board reaches to 2 mm. test board size 100401.0 test board material glass epoxy-resin solder cream thickness 0.15(br series) 0.10(nr series) land dimension nr40 1.2 1.21.6 3.7 force rod board test sample 20 10 r230 r5 45 ? 2mm 45 ? 2mm land dimension nr30 0.8 0.81.4 2.7 land dimension nr80 1.8 1.83.8 7.5 land dimension nr60 1.15 1.153.7 5.7 land dimension brl2012 0.65 0.65 0.9 1.4 land dimension brc1608 0.55 0.55 0.8 1.0 0.7 0.70.8 1.8 land dimension ' 2016 land dimension nrh24 0.8 0.80.8 2.4 land dimension brl2518 0.65 0.651.5 1.95 land dimension brl3225 1.0 1.01.6 2.7 printed board thickness: 1.0mm unit:mm
ferrite products 5 369 ? pt ???] ?; w m tx ? pt
a ? t b?s ? ? ? ? cs ? ?xi^m { ? please read the "notice for taiyo yuden products" before using this catalog. brc1608, brl2012, brc2016, brl2518, brl3225 type nrh24, nr30/40/60/80, nrg40 type brc1608,brl2012,brc2016,brl2518, brl3225 type, nrh24, nr30/40/60/80, nrg40 type the test samples shall be soldered to the test board by the re?ow. pplied force 10 n to x and y directions. duration5s. solder cream thickness 0.15mm. nr10050 type applied force 5 n to x and y directions. duration5s. brc 1608 ,brl 2012,brc2016,brl2518, brl3225 type, nrh24, nr30/40/60/80, nrg40 type, nr10050 type the test samples shall be soldered to the test board by the re?ow. then it shall be submitted to below test conditions. frequency range 10?55hz total amplitude 1. 5mm may not exceed acceleration 196 m/s 2 sweeping method 10hz to 55hz to 10 hz for 1 min. x for 2 hours on each x, time y y, and z axis. z recovery at least 2 hrs of recovery under the standard con- di t ion sfter the test, followed by the measurement within 48 hrs. brc1608,brl2012,brc2016,brl2518, brl3225 type, nrh24, nr30/40/60/80, nrg40 type, nr10050 type the test samples shall be dipped in flux, and then im- me r sed in molten solder as shown in below table y flux methanol solution containing rosin 25 ? . nrh24, nr30/40/60/80 type,nr10050 type : solder temperature 245?5? time 5?1.0sec brc1608,brl2012,brc2016,brl2518,brl3225 type solder temperature 245?5? time 5?0.5sec timmersion depth all sides of mounting terminal shall be immersed. 12.adhesion of terminal electrode 13.resistance to vibration 14.solderability 10n, 5s item speci?ed value test method and remarks 2/4 reliability data y nr10050 type at least 90? of surface of terminal electrode is covered by new solder. inductance changewithin?10? no significant abnormality in appearance. shall not come off pc board.
ferrite products 5 371 ? pt ???] ?; w m tx ? pt
a ? t b?s ? ? ? ? cs ? ?xi^m { ? please read the "notice for taiyo yuden products" before using this catalog. inductance changewithin?10? no significant abnormality in appearance. inductance changewithin ?10? no significant abnormality in appearance. inductance change within ?10? no significant abnormality in appearance. 15.resistance to soldering heat 16.thermal shock 17.damp heat item speci?ed value test method and remarks reliability data y 3/4 brc 1608 ,brl2012 ,brc2016 ,brl2518 ,brl3225 type 3 times of re?ow oven at 230 ? min for 40 sec. with peak temperature at 2 60 0 5 ? for 5 sec. nrh24, nr30/40/6012 ~ 6028 ~ 6045/80, nrg40t ype , nr10050 type the test sample shall be exposed to re?ow oven at 230? 5 ? for 40 seconds, with peak temperature at 260?5? for 5 seconds, 2 times. nr6020 type the test sample shall be exposed to re?ow oven at 230? 5? for 40 seconds, with peak temperature at 250 5 0 ? for 5 seconds, 2 times. test board thickness 1.0 mm test board material : glass epoxy-resin brc1608,brl2012,brc2016,brl2518, brl3225 type, nrh24, nr30/40/60/80, nrg40 type, nr10050 type the test samples shall be soldered to the test board by the re?ow. the test samples shall be placed at speci?ed temperature for speci?ed time by step 1 to step 4 as shown in below table in sequence. the temperature cycle shall be repeated 100 cycles. conditions of 1 cycle step temperature ? duration min 1 40?3 30?3 2 room temperature within 3 3 85?2 30?3 4 room temperature within 3 brc1608,brl2012,brc2016,brl2518,brl3225 type temperature 60?2? humidity 90?95?rh time 1000 hours. recovery at least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs. nrh24, nr30/40/60/80, nrg40 type t h e test samples shall be soldered to the test board by the re?ow. the test samples shall be placed in thermostatic oven set at speci?ed temperature and humidity as shown in below table. temperature 60?2? humidity 90?95?rh time 500?24hour nr10050 type brc1608, brl2012, brc2016, brl2518, brl3225 type nrh24, nr30/40/60/80, nrg40 type
ferrite products 5 373 ? pt ???] ?; w m tx ? pt
a ? t b?s ? ? ? ? cs ? ?xi^m { ? please read the "notice for taiyo yuden products" before using this catalog. b r c 1 6 0 8 , b r l 2 0 1 2 , b r c 2 0 1 6 , b r l 2 5 1 8 , b r l 3 2 2 5 ty p e temperature 60?2? humidity 90?95?rh applied current rated current time 1000hours. recovery at least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs. nrh24, nr30/40/60/80, nrg40 type , nr10050 type the test samples shall be soldered to the test board by the re?ow. the test samples shall be placed in thermostatic oven set at speci?ed temperature and humidity and applied the rated current continuously as shown in below table. t emperatur e 60?2? humidity 90?95?rh applied current rated current time 500?2hour brc1608,brl2012,brc2016,brl2518,brl3225 type t emperatur e ?40?2? duration 1000hours recovery at least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs. nrh 24 , nr 30/40/60/80, nrg40 type , nr10050 type the test samples shall be soldered to the test board by the re?ow. after that, the test samples shall be placed at test conditions as shown in below table. t emperatur e 40?3? time 500?24hour b r c 1 6 0 8 , b r l 2 0 1 2 , b r c 2 0 1 6 , b r l 2 5 1 8 , b r l 3 2 2 5 ty p e temperature 85?2? duration 1000hours recovery at least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs. nr 10050 type temperature 105?3? time 500?24hour recovery at least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs. nrh24, nr30/40/60/80, nrg40 type the test samples shall be soldered to the test board by the re?ow soldering temperature 85?2? applied current rated current time 500?24hour 4/4 reliability data y inductance changewithin?10? no significant abnormality in appearance. item speci?ed value test method and remarks inductance change within?10? no significant abnormality in appearance. 18 .loading under damp heat yyy 19.l o w temperature life test 20 .high temperatur e life test 21.loading at high temperatur e life test 22 .standard condition inductance change within?10? no significant abnormality in appearance. inductance changewithin?10? no significant abnormality in appearance. inductance change within?10? no significant abnormality in appearance. standard test condition unless otherwise speci?ed, temperature is 20?15? and 65?20?of relative humidity. when there are question concerning measurement result : in order to provide correlation date, the test shall be condition of 20?2? of temperature, 65?5 % relative humidity. inductance is in accordance with our measured value. nr10050 type brc1608, brl2012, brc2016, brl2518, brl3225 type nrh24, nr30/40/60/80, nrg40 type
ferrite products 5 375 ? pt ???] ?; w m tx ? pt
a ? t b?s ? ? ? ? cs ? ?xi^m { ? please read the "notice for taiyo yuden products" before using this catalog. technical considerations stages precautions smd inductors 1.circuit design 2.pcb design 3.considerations for automatic placement 4.soldering 5.cleaning 6.handling 7.storage conditions operating environment, 1.the products described in this specification are intended for u s e in general electronic equipment,(office supply e qu ipment, telecommunications systems, measuring eq u ipment, and household equipment). they are not intended for use in mission-critical equipment or systems requiring special quality and high reliability (traffic systems, sa f ety equipment, aerospace systems, nuclear control sy s tems and medical equipment including life-support systems,) wher e product failure might result in loss of life, injury or damage. for such uses, contact taiyo yuden sales department in advance. land pattern design 1.please refer to a recommended land pattern. adjustment of mounting machine 1 . e xcessive impact load should not be imposed on the pr oducts when mounting onto the pc boar ds. 2. m ounting and soldering conditions should be checked befor ehand. reflow soldering 1.please contact any of our offices for a reflow soldering, and refer to the recommended condition specified. 2.this products is reflow soldering only. 3.please do not add any stress to a product until it returns in normal temperature after reflow soldering. lead free soldering 1.when using products with lead free soldering, we request to u s e them after confirming of adhesion, temperature of r esistance to soldering heat, soldering etc suf ficiently. recommended conditions for using a soldering iron: ( nr10050 type) put the soldering iron on the land-pattern. soldering iron's temperature - below 350 ? duration - 3 seconds or less the soldering iron should not directly touch the inductor. cleaning conditions 1.washing by supersonic waves shall be avoided. handling 1. keep the product away from all magnets and magnetic objects. breakaway pc boards (splitting along perforations) 1.when splitting the pc board after mounting product, care should be taken not to give any stresses of deflection or twisting to the board. 2.board separation should not be done manually, but by using the appropriate devices. mechanical considerations 1 . please do not give the product any excessive mechanical shocks. 2.please do not add any shock and power to a product in transportation. pick-up pressure 1.please do not push to add any pressure to a winding part. please do not give any shock and push into a ferrite core exposure part. packing 1 . please avoid accumulation of a packing box as much as possible. storage 1.to maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the storage area should be controlled. ~ recommended conditions y ambient temperatureyyyyy 0 ? 40? yhumidity ybelow 70% rh t h e ambient temperature must be kept below 30 ? . even under i d eal storage conditions, solderability of products electrodes ma y decrease as time passes. for this reason, product should b e used within 6 months from the time of delivery. in case of storage over 6 months, solderability shall be checked befor e actual usage. surface mounting ~ mounting and soldering conditions should be checked befor ehand. ~ applicable soldering process to this products is reflow soldering only. 1. when installing products, care should be taken not to apply distortion stress as it may deform the products. 1.if products are used beyond the range of the recommended conditions, heat stresses may deform the products, and consequently degrade the reliability of the products. 2 brc1608, brl2012, brl2518, brc2016, b '! 3225type 3 2 nrh24, nr30/40/60/80type 3y 2 nr10050type 3 1.if washing by supersonic waves, supersonic waves may cause broken products. 1.planning pattern configurations and the position of products should be carefully performed to minimize stress. 1.there is a case to be damaged by a mechanical shock. 2.there is a case to be broken by the handling in transportation. 1.damage and a characteristic can vary with an excessive shock or str ess. 1 .there is a case that transformation and a product of tape are damaged by accumulation of a packing box. 1.under a high temperature and humidity environment, problems such as reduced sol derability caused by oxidation of terminal electrodes and deterioration of taping/packaging materials may take place. temperature |? recommended reflow condition pb free solder 300 200 100 0 90 ? 30sec 150 ? 180 30 ? 10sec 230? min 5sec max 5sec max temperature |? recommended reflow condition pb free solder 300 200 100 0 90 ? 30sec 150 ? 180 30 ? 10sec 230? min peak 260 5/ ? 0? peak 250 5/ ? 0? 5sec max temperature |? recommended reflow condition pb free solder eating time 2 sec 3 eating time 2 sec 3 eating time 2 sec 3 300 200 100 0 90 ? 30sec 150 ? 180 30 ? 10sec 230? min peak 250 5/ ? 0? precautions

▲Up To Search▲

Price & Availability of BRC1608T2R2M

	To Download BRC1608T2R2M Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .